How To Change Mechanical Cannon Safe Emp Dual Access Lock Combination

LaGard/Kaba (LG)	800-950-4744	Website
BigRed	877-423-8073	Website
Sargent & Greenleaf (S&G)	800-826-7652	Website
LP Locks	949-362-8977	Website
SecuRam	805-988-8088	Website

Dialing a Mechanical Lock

To dial a Mechanical Lock Combination:
1. Turn the dial to the LEFT (counter clock-wise), stopping when _(1st number)_ is aligned with the opening index the FOURTH fourth dimension.
2. Turn the dial to the RIGHT (clockwise), stopping when _(2d number)_ is aligned with the opening alphabetize the 3rd time.
3. Turn the dial to the LEFT (counter clock-wise), stopping when _(3rd number)_ is aligned with the opening index the Second time.
iv.Plow the dial to the Correct (clockwise), until the punch stops, and the bolt retracts.

Using the Day Key: Most safes come up with a key locking punch. Shut the door and turn the prophylactic handle. To lock the dial, insert the punch key and turn the key a one-half a turn clockwise. Plough the dial to the right (clockwise). The dial should stop around 87.

Note: The day primal feature is not suggested to utilise as the master source of security.

Rotate the dial counterclockwise to the number 0.
Insert the primal and turn it 180 degrees counterclockwise until it stops.
Remove the key and verify the dial is locked by turning the handle.

South&G Mechanical Lock Back up
For Combination Lock Instructions

Here is a booklet for lock troubleshooting that may be able to assist you.

Using an Electronic Lock

Southward&G Electronic Lock Support
For Electronic Lock Instructions

Sargent & Greenleaf 6120 Electronic Lock:
1. Press one-2-3-4-v-half dozen-#, wait for tone.
2. Turn handle

LP Combination Lock Support

Check out www.lplocks.com

For Combination Lock Instructions

LP Electronic Lock Support
Check out www.lplocks.com

For Electronic Lock Instructions "Base Line Fundamental Pad - Dual User Set-Up Instructions"

LaGard/Kaba Electronic Lock Support

Using an EMP Redundant Lock

LaGard Combination lock (Redundant Lock):

1. Plough the dial to the RIGHT (clockwise), stopping when _(1st number)_ is aligned with the opening index the 5th fourth dimension.
ane. Turn the dial to the LEFT (counter clock-wise), stopping when _(2nd number)_ is aligned with the opening index the FOURTH time.
2. Turn the dial to the Right (clockwise), stopping when _(3rd number)_ is aligned with the opening index the THIRD time.
three. Plow the dial to the LEFT (counter clock-wise), stopping when _(4th number)_ is aligned with the opening index the Second time.
4.Turn the punch to the Correct (clockwise), until the dial stops, and the bolt retracts.

Securam Combination Lock (EMP Redundant Lock / Safe Logic Xtreme)

To modify the battery to your SecuRam SafeLogic Xtreme Keypad delight refer to page ix in the instruction manual that came with the prophylactic.

----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- -----------

Looking for a locksmith?